proof donor_lower_hole_pos dlhp Trendsetter_400/800_Proofing Indicates the distance from the leading edge of the carrier to the lower donor vacuum holes (in mm) used for each proof type. These should not be adjusted once the machine has been configured properly as they correspond to distances around the drum which are fixed-position. word
  • 38
    •
  • 0 to 1023 (mm)
    •      cal
  • ../nvs/proof_cal_rlhp.xmlNVS: proof rlhp
    •
  • ..\..\ShowAllErrors.htmFirmware 0 Error Index
  • ..\..\ShowAllCommands.htmFirmware 0 Command Index
  • ..\..\ShowAllNVS.htmFirmware 0 NVS Index
    •  Updated: Wed Jul 16 19:37:24 2008 PST